TRNW-2: 47RE NV4500 countershaft no endplay

[Wayne]

Is it an nv4500, or a 47re?
Sent from my iPhone

> On Feb 13, 2025, at 12:24 PM, Frank Grieve via trnw2 <trnw2 at trnw.net> wrote:
> 
>  Date: Thu Feb 13 9:24:30 PST 2025
> Subject: 47RE NV4500 countershaft no endplay
> 
> 2000 Dodge NV4500 replacing input, cluster, bearing and syncros for lube failure. The countershaft has no endplay. I'm certain the front bearing and race are bottomed out and the rear bearing is seated. The rear retainer sits about .060 from bottoming out on case. If I tighten the retainer it binds the shaft and i already ruined one bearing trying to pull it together. I'm tempted to put some washers under the rear retainer to get some endplay but gosh don't want to. Anybody ever comer across this?
> 
> Frank Grieve
> Transmission Exchange Of Liberty
> Liberty, Texas USA
> TRNW Member Since: 9/11/2007
> 
> This message was sent from the TRNW Technical Discussion Forum (trnw2). You were sent this message because you have subscribed to our mailing list. If you don't want to receive these emails from TRNW in the future, please unsubscribe here:
> https://www.trnw.net/unsubscribe.php?forum=2
> TRNW Inc., 2825 Walnut Terrace, Modesto, CA 95355
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.trnw.net/pipermail/trnw2/attachments/20250213/6c86552b/attachment.html>