TRNW-2: 10r80 torque converter stator loose

Tod Chretien tod at trnw.net
Sat Apr 19 07:06:08 PDT 2025


Thank you for posting this Dan! We just had issues with one. Fresh 
rebuild with dealer torque converter and valve body. No lockup. P0741 
and P1744.


We must have got lucky installing the 2nd converter. LOL


-- 
Best Regards,
Tod Chretien
TRNW inc.
https://www.trnw.net


On 4/17/2025 12:30 PM, Dan Hogan via trnw2 wrote:
> Chris,
>
> This is normal and you need to install the torque converter like a 
> 6T70 with the bellhousing facing the ceiling to avoid damaging seals.  
> Do not install the converter the old-fashioned way. It's not the same.
>
>
> Precision places a plastic plug inside to keep the stator from banging 
> around prior to installation.  Sounds like transtar doesn't use a cap 
> to secure?
>
> ---
>
>
> Dan Hogan
>
> Buster's Transmission Service
>
> https://busterstransmission.com <https://busterstransmission.com>
>
> 704.847.5321
>
> ------------------------------------------------------------------------
> *From:* trnw2-bounces at trnw.net <trnw2-bounces at trnw.net> on behalf of 
> Chris and Cathy Kershaw via trnw2 <trnw2 at trnw.net>
> *Sent:* Thursday, April 17, 2025 1:33 PM
> *To:* Technical Discussion Forum <trnw2 at trnw.net>
> *Subject:* TRNW-2: 10r80 torque converter stator loose
> Group, we’ve installed dozens of recon 10r converters. In the past few 
> months had 3 of these recon 10r80 converters where the stator falls 
> side to side. Not just a little loose but falls so far off center the 
> only way to install the converter would be bellhousing up.
>
> My salesman is replacing them so far but the plant is telling him this 
> is normal, no problem found. I haven’t seen an original converter with 
> near this much play in the stator. What are you guys seeing ? I have a 
> video and pictures if anyone wants to see i can send it directly to 
> you, the mailer kicked it back.
>
> This message was sent from the TRNW Technical Discussion Forum (trnw2). You were sent this message because you have subscribed to our mailing list. If you don't want to receive these emails from TRNW in the future, please unsubscribe here:
> https://www.trnw.net/unsubscribe.php?forum=2
> TRNW Inc., 2825 Walnut Terrace, Modesto, CA 95355
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.trnw.net/pipermail/trnw2/attachments/20250419/353f3141/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 439503 bytes
Desc: not available
URL: <http://lists.trnw.net/pipermail/trnw2/attachments/20250419/353f3141/attachment-0001.png>


More information about the trnw2 mailing list