TRNW-2: 10R80 Solid Ring Sizer

[Healy Powertrain]

Thanks for all the suggestions! I'll try to make up my mind..🤔

Marcel Verwijmeren
Healy Powertrain
Driveline Solutions
T 06 57745407
E <info at healypowertrain.com>
W <http://www.healypowertrain.com/>


On Tuesday, April 29, 2025 at 3:45:54 pm +02:00, Phil Materi via trnw2 <trnw2 at trnw.net> wrote:

> We like the set from vmsconcepts but have been contemplating getting a 3D printer. Dan, how difficult is it to design something like that for the 3D printer? Is it as simple as taking a few measurements and entering them into a program? Or does one need to be a rocket scientist and have to know a bunch of different formulas and calculations?
> 
> Thanks,
> 
> Phil
> 
> 
> Sent from my iPad
> 
> 
> 
> > On Apr 28, 2025, at 6:23 PM, Dan Hogan via trnw2 <trnw2 at trnw.net> wrote:
> > 
> > 
> > If you have access to a 3d printer or buddy with one, there are good sizers available online. I printed a set for myself and a few nearby shops.
> > 
> > Pretty good design. 3d printer is a good asset in an auto shop now. Just buy a decent one you can use out of the box.
> > 
> > 
> > 
> > 
> > —-
> > Dan Hogan
> > Buster’s Transmission Service
> > Matthews, NC 28105
> > 704-847-5321
> > https://busterstransmissionservice.com
> > 
> > 
> > 
> > > On Apr 28, 2025, at 5:23 PM, Healy Powertrain via trnw2 <trnw2 at trnw.net> wrote:
> > > 
> > > 
> > > 
> > > 
> > > Hey Group
> > > 
> > > What do y'all use for Re-sizing the Solid rings? Im using the actual parts they seal on for re-sizing, but it takes too much time. I would love to speed up this process.
> > > Ive seen some aftermarket tools on Ebay etc, but would like to find out what the best tool and/or kit is
> > > for this job, Aftermarket or OEM.
> > > Thanks!
> > > 
> > > Marcel Verwijmeren
> > > Healy Powertrain
> > > Driveline Solutions
> > > T 06 57745407
> > > E <info at healypowertrain.com>
> > > W www.healypowertrain.com <https://urldefense.proofpoint.com/v2/url?u=http-3A__www.healypowertrain.com_&d=DwMFaQ&c=euGZstcaTDllvimEN8b7jXrwqOf-v5A_CdpgnVfiiMM&r=smOzNWPZu5-MBJg-0tkHhHoVW9xEBKdKWsMxBeFAJDZVJI6X79ZhQVJ_erT6I9aF&m=VXkvZQ2s-HsmgNVak99nJnvJDqjtW0aHh_Xbwymbp6BiCq6PbHAfghPwqYOCUSw1&s=96ff-bHCciau-zTvFe5PIvmfKlWT6Wfn3U6HxyNO38Y&e=>
> > > This message was sent from the TRNW Technical Discussion Forum (trnw2). You were sent this message because you have subscribed to our mailing list. If you don't want to receive these emails from TRNW in the future, please unsubscribe here:
> > > https://urldefense.proofpoint.com/v2/url?u=https-3A__www.trnw.net_unsubscribe.php-3Fforum-3D2&d=DwICAg&c=euGZstcaTDllvimEN8b7jXrwqOf-v5A_CdpgnVfiiMM&r=smOzNWPZu5-MBJg-0tkHhHoVW9xEBKdKWsMxBeFAJDZVJI6X79ZhQVJ_erT6I9aF&m=VXkvZQ2s-HsmgNVak99nJnvJDqjtW0aHh_Xbwymbp6BiCq6PbHAfghPwqYOCUSw1&s=mufeyQeTZ4AvNCE3vs_Rfwt7R23Az2Uk2LEIan1zKLE&e=
> > > 
> > > TRNW Inc., 2825 Walnut Terrace, Modesto, CA 95355
> > > This message was sent from the TRNW Technical Discussion Forum (trnw2). You were sent this message because you have subscribed to our mailing list. If you don't want to receive these emails from TRNW in the future, please unsubscribe here:
> > https://www.trnw.net/unsubscribe.php?forum=2
> > 
> > TRNW Inc., 2825 Walnut Terrace, Modesto, CA 95355
> > 
> This message was sent from the TRNW Technical Discussion Forum (trnw2). You were sent this message because you have subscribed to our mailing list. If you don't want to receive these emails from TRNW in the future, please unsubscribe here:
> <https://www.trnw.net/unsubscribe.php?forum=2>
> TRNW Inc., 2825 Walnut Terrace, Modesto, CA 95355
> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.trnw.net/pipermail/trnw2/attachments/20250429/da3b66d2/attachment-0001.html>