TRNW-2: AX4S, o-ring the o-drive servo pin

[Lee Hughes]

Thanks Wayne, never done this before so trying to be cautious. where exactly on the pin does the groove cut go and how do you know how deep a groove cut needed? parts for these are getting scarce! thanks For any advice Lee

> On 05/22/2025 9:00 PM EDT Wayne via trnw2 <trnw2 at trnw.net> wrote:
>  
>  
> It’d be easy to do with a lathe and groove cutting insert. 
> Sent from my iPhone
> 
> 
> > On May 22, 2025, at 4:03 PM, pat schulte via trnw2 <trnw2 at trnw.net> wrote:
> > 
> > 
> 
> > I have cut oring grooves in pins before with a hacksaw blade or cutoff wheel.
> > 
> > On Thu, May 22, 2025 at 12:57 PM Lee Hughes via trnw2 <trnw2 at trnw.net mailto:trnw2 at trnw.net> wrote:
> > 
> > > Date: Thu May 22 12:56:45 PDT 2025
> > > Subject: AX4S, o-ring the o-drive servo pin
> > > 
> > > Hello Everyone , I would like to add an o-ring to the 0-drive. servo pin. I looked everywhere for chuck stansy # to get in touch with him as he said he has done this several times any way has anyone else ever done this modification that I could ask a few questions to. The trans is in the car and I would like to avoid pulling it. Thanks have a nice day! Lee
> > > 
> > > Lee Hughes
> > > Hughes Precision Automotive
> > > Martinsville, Virginia USA
> > > TRNW Member Since: 9/14/2007
> > > 
> > > This message was sent from the TRNW Technical Discussion Forum (trnw2). You were sent this message because you have subscribed to our mailing list. If you don't want to receive these emails from TRNW in the future, please unsubscribe here:
> > > https://www.trnw.net/unsubscribe.php?forum=2
> > > TRNW Inc., 2825 Walnut Terrace, Modesto, CA 95355
> > > 
> >  
> >  
> > --
> > Pat Schulte
> > AAMCO Transmissions
> > Temecula, Ca.
> > This message was sent from the TRNW Technical Discussion Forum (trnw2). You were sent this message because you have subscribed to our mailing list. If you don't want to receive these emails from TRNW in the future, please unsubscribe here:
> > https://www.trnw.net/unsubscribe.php?forum=2
> > TRNW Inc., 2825 Walnut Terrace, Modesto, CA 95355
> > 
> This message was sent from the TRNW Technical Discussion Forum (trnw2). You were sent this message because you have subscribed to our mailing list. If you don't want to receive these emails from TRNW in the future, please unsubscribe here:
> https://www.trnw.net/unsubscribe.php?forum=2
> TRNW Inc., 2825 Walnut Terrace, Modesto, CA 95355
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.trnw.net/pipermail/trnw2/attachments/20250522/30c45f91/attachment.html>