TRNW-2: 4R75E, chnge to hard wire harnexss

[Fred Whitaker]

 If 2WD watch out. 2 different length output shaft/tailhousing. And yes make sure you have a tailhousing that fits your case. There are also 2WD output shafts with O ring for yoke.  4WD you have to make sure adapter housing will fit your case.  Electronics swap no problem.
________________________________
From: trnw2-bounces at trnw.net <trnw2-bounces at trnw.net> on behalf of Gregory Shaffer via trnw2 <trnw2 at trnw.net>
Sent: Friday, May 30, 2025 3:02 PM
To: trnw2 at trnw.net <trnw2 at trnw.net>
Subject: TRNW-2: 4R75E, chnge to hard wire harnexss

Date: Fri May 30 13:02:50 PDT 2025
Subject: 4R75E, chnge to hard wire harnexss

Good afternoon, I have a 2005 f150 that I want to build a core to get this thing out of here. The core I have is a late model with soft wire internal harness. If i change the solenoids and internal harness will every thing else work. I am pretty sure it will and I think I have done it before but cannot remember.
Thanx
Greg

Gregory Shaffer
Alliance Autoworks
Tampa, Florida USA
TRNW Member Since: 5/11/2011

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.trnw.net/pipermail/trnw2/attachments/20250530/b3a2ff12/attachment-0001.html>