TRNW-2: TCM waveform on my scanner from a 08 Humer H3

[donnadan at gilanet.com]

I still have not received any replies on this issue. Anyone there? 


From: "DAN OR DONNA STEWART" <donnadan at gilanet.com> 
To: "DAN OR DONNA STEWART" <donnadan at gilanet.com>, "TRNW2" <trnw2 at trnw.net> 
Sent: Wednesday, August 6, 2025 12:30:07 PM 
Subject: Re: TRNW-2: TCM waveform on my scanner from a 08 Humer H3 

Okay, now it's going into default again. I am thinking this used and recalibrated (for this VIN#) TCM is not working right. Any experience you guys might have with this would be welcomed. 


From: "TRNW2" <trnw2 at trnw.net> 
To: "TRNW2" <trnw2 at trnw.net> 
Sent: Saturday, August 2, 2025 3:21:37 PM 
Subject: TRNW-2: TCM waveform on my scanner from a 08 Humer H3 

Does anyone have an example of a scanner waveform, commanded and actual? I am getting hash when the amperage changes. I can't remember what this should look like. It came in under default, and I could not manually make the amperage change with the scanner, so I changed the TCM after testing the circuit through the PCS to TCM. It still kept setting PCS code and default, so I changed the solenoid from new style to old style, and it seems to work ok, but occasionally I still see the code, even though it is not going into default. Hope this makes sense. 

This message was sent from the TRNW Technical Discussion Forum (trnw2). You were sent this message because you have subscribed to our mailing list. If you don't want to receive these emails from TRNW in the future, please unsubscribe here: 
https://www.trnw.net/unsubscribe.php?forum=2 
TRNW Inc., 2825 Walnut Terrace, Modesto, CA 95355 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.trnw.net/pipermail/trnw2/attachments/20250807/06bbcfed/attachment.html>