TRNW-2: Nissan CVT supplier

[pat schulte]

We rebuild around 60-70 a year. There is a learning curve but if you have a
source for reman VBs, and pulley sets you should be good.

On Thu, Aug 14, 2025 at 4:49 AM Brett Karulak via trnw2 <trnw2 at trnw.net>
wrote:

> I ran into this problem about a year ago with a 16 awd, I went ahead and
> rebuilt it myself, oe vb from Berkeley and at the time was very affordable,
> pulley set which still has to be gone through and seal kit from wit, needed
> the guy out to relearn and remove judder dtcs. I got clutches and pistons
> but they were still mint and could be reused. Charged like 4200 and still
> made okay money with all invested, will rebuild the next one.
> This message was sent from the TRNW Technical Discussion Forum (trnw2).
> You were sent this message because you have subscribed to our mailing list.
> If you don't want to receive these emails from TRNW in the future, please
> unsubscribe here:
> https://www.trnw.net/unsubscribe.php?forum=2
> TRNW Inc., 2825 Walnut Terrace, Modesto, CA 95355



-- 
Pat Schulte
AAMCO Transmissions
Temecula, Ca.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.trnw.net/pipermail/trnw2/attachments/20250814/28622588/attachment.html>