TRNW-2: Nissan CVT supplier

Fri Aug 15 04:10:38 PDT 2025

Most of the bolts and nuts that they require you to purchase are not 
even needed IMO, we don't even remove the axles from the vehicle, just 
pop them out of the transmission and leave them hanging, the bolt kit 
doesn't even come with new converter nuts, I would think that would be a 
common one-time use item? One of the kits that they supplied even came 
with a gallon of antifreeze! Don't know why, we didn't lose any during 
the R&R. The main thing they want to see on the invoice is their fluid, 
otherwise, no warranty, period! On the one that we have in the shop now, 
it looks like we are going to have to do the R&R for $250! We could send 
it to them but they say that they would charge us a $250 diagnostic fee 
and the customer will be on the hook for the R&R labor! So I guess we'll 
just take care of it and probably have to fight just to get our $250!

On 2025-08-14 6:34 pm, Fred Whitaker via trnw2 wrote:
> Yea the bolt and axle nut thing is something they started a year or
> so ago.  Iduno I never felt right building them. Used belts, pulleys
> and valve body roulette  depending on what year/model etc,and charging
> more than a dealer transmission at a Franchise shop for something I
> knew wasn't as good.  I still build one every now and then,but it's
> usually because of unusual circumstances. And I am no longer at a
> "franchise" shop.
>   We use A&E tools and computers for programming.
> https://www.aetools.us/?srsltid=AfmBOopURUp6MfUhJWN-KzQyRAnIEb8H3kcKDKu9ovCfsYQ08DYc-SDj
> [2]     The shop owner bought a laptop and J234 stuff and other things
> from them,and says they only charge for the dealer subscription. Which
> makes no sense to me but he swears it's true. I have a feeling he
> isn't telling me everything. They remotely take over the laptop and
> haven't bricked anything yet. You call them and they almost always get
> back the same day. They don't "enjoy" doing Nissans but have always
> got it done first time and we do quite a few.
> 
>  [2]
>  AE Tools & Computers- Real Tools, Real Support, Your One-Stop Shop.
> [2]
>  AE Tools & Computers puts your shop's success first. We offer
> personalized consultations to find the perfect aftermarket and OEM
> diagnostic solutions (Autel, Nissan VI 3, VCM3, and more), along with
> the training and support to help you streamline operations and
> increase your shop's capabilities.
>  www.aetools.us
> 
> -------------------------
> 
> From: trnw2-bounces at trnw.net <trnw2-bounces at trnw.net> on behalf of
> Chris and Cathy Kershaw via trnw2 <trnw2 at trnw.net>
> Sent: Thursday, August 14, 2025 10:10 AM
> To: jeff gonzalez <max8488 at yahoo.com>; Technical Discussion Forum
> <trnw2 at trnw.net>
> Subject: Re: TRNW-2: Nissan CVT supplier
> 
> I do buy axle nuts, ball joint bolts/nuts, basically any life & death
> hardware that service info says to replace. Not sure what's included
> in the above mentioned bolt kit though.
> 
> On Thu, Aug 14, 2025 at 11:04 AM jeff gonzalez via trnw2
> <trnw2 at trnw.net> wrote:
> 
>> We have been buying them from transtar and haven’t had a problem
>> yet and we do a lot of them. Dealer always trying to charge you for
>> bs !!! Not really sure why you need to buy the bolts for it?
>> 
>> Sent from my iPhone
>> 
>>> On Aug 14, 2025, at 9:20 AM, pat schulte via trnw2
>>> <trnw2 at trnw.net> wrote:
>> 
>> 
>> 
>> I buy Berkeley Standard reman VBs from Transtar. I have had good
>> luck with them.
>> 
>> On Thu, Aug 14, 2025 at 7:16 AM Chris and Cathy Kershaw via trnw2
>> <trnw2 at trnw.net> wrote:
>> 
>> Thanks for all the replies. Looks like we’ll be doing dealer on
>> these 2. I’d like to build them but need to find a source for oe
>> valve bodies, any suggestions ? The dealer wants 1950 each for the
>> valve body on the 2 we have here now. Hard to build it when the unit
>> is 2750. The whole job for the dealer unit with tax here is right
>> around 6000.
>> 
>> The dealer units having a 3 year warranty now is pretty good. I
>> originally started on the Berkeley units because of the 2 year
>> warranty and no core charge. Our dealer parts department says need
>> to buy fluid with the transmission, nothing about a bolt kit. I have
>> programmed these in house but it’s quite time consuming and seems
>> proof is needed when there’s a warranty issue. I’ve been
>> trailering them to Nissan for programming when we do dealer units.
>> Using Transtar’s rap for the Transtar units.
>> 
>> On Thu, Aug 14, 2025 at 8:21 AM <jbockus at hiwaay.net> wrote:
>> We have installed several factory remans over the years and never
>> had an
>> issue with one, until this week! Had a 2017 Altima come back with
>> 5000
>> miles on it, it pulls forward in every gear and has several
>> transmission
>> codes, including the judder code. We always purchase the one-time
>> fastener kit which they now require in order to give the 36 month,
>> unlimited mileage warranty and we have them towed to the dealer for
>> programming, including the ones that come with the CD to erase the
>> Judder code. We did all that with this one and have all our
>> documentation. We are now waiting to hear from the service manager
>> who
>> was out yesterday to see what they are going to do. So far they are
>> saying that if they find that it was a defect in their product, that
>> 
>> they will replace the transmission themselves free of charge. We
>> will
>> see, and I will keep the group updated.
>> 
>> On 2025-08-14 6:17 am, Fred Whitaker via trnw2 wrote:
>>> I have been using dealer CVT's for the most part since I changed
>>> jobs 4 or 5 years ago.  I'm sure if the need arises they will
>> still
>>> run you through the ringer. But the fact is,in those 4 or 5 years
>> I
>>> can't remember a single one we had a problem with.
>>> 
>>> -------------------------
>>> 
>>> From: trnw2-bounces at trnw.net <trnw2-bounces at trnw.net> on behalf of
>>> Chris Kershaw via trnw2 <trnw2 at trnw.net>
>>> Sent: Wednesday, August 13, 2025 12:25 PM
>>> To: trnw2 at trnw.net <trnw2 at trnw.net>
>>> Subject: TRNW-2: Nissan CVT supplier
>>> 
>>> Date: Wed Aug 13 10:25:15 PDT 2025
>>> Subject: Nissan CVT supplier
>>> 
>>> Group, we've installed several nissan dealer cvt units and several
>>> transmaxx/berkley standard units. My dealer warranty experiences
>> of
>>> the past make me steer towards aftermarket units when it's
>> possible .
>>> Transtar is currently sold out of a 17 rogue 2.5 unit, I have 2
>>> sitting here sold. Are there any other good sources out there? I
>> know
>>> wit had units but not sure what they really are and we don't have
>> much
>>> support there. Might just have to go dealer on these 2.
>>> 
>>> Chris Kershaw
>>> Kershaw Services Llc The Gear Box
>>> Mechanicsville, Maryland USA
>>> TRNW Member Since: 5/1/2023
>>> This message was sent from the TRNW Technical Discussion Forum
>> (trnw2).
>>> You were sent this message because you have subscribed to our
>> mailing
>>> list. If you don't want to receive these emails from TRNW in the
>>> future, please unsubscribe here:
>>> https://www.trnw.net/unsubscribe.php?forum=2 [1]
>>> TRNW Inc., 2825 Walnut Terrace, Modesto, CA 95355
>> This message was sent from the TRNW Technical Discussion Forum
>> (trnw2). You were sent this message because you have subscribed to
>> our mailing list. If you don't want to receive these emails from
>> TRNW in the future, please unsubscribe here:
>> https://www.trnw.net/unsubscribe.php?forum=2
>> TRNW Inc., 2825 Walnut Terrace, Modesto, CA 95355
> 
>  --
> 
> Pat Schulte
> AAMCO Transmissions
> Temecula, Ca. This message was sent from the TRNW Technical Discussion
> Forum (trnw2). You were sent this message because you have subscribed
> to our mailing list. If you don't want to receive these emails from
> TRNW in the future, please unsubscribe here:
> https://www.trnw.net/unsubscribe.php?forum=2
> TRNW Inc., 2825 Walnut Terrace, Modesto, CA 95355 This message was
> sent from the TRNW Technical Discussion Forum (trnw2). You were sent
> this message because you have subscribed to our mailing list. If you
> don't want to receive these emails from TRNW in the future, please
> unsubscribe here:
> https://www.trnw.net/unsubscribe.php?forum=2
> TRNW Inc., 2825 Walnut Terrace, Modesto, CA 95355
> 
> Links:
> ------
> [1] https://www.trnw.net/unsubscribe.php?forum=2
> [2] 
> https://www.aetools.us/?srsltid=AfmBOopURUp6MfUhJWN-KzQyRAnIEb8H3kcKDKu9ovCfsYQ08DYc-SDj
> This message was sent from the TRNW Technical Discussion Forum (trnw2). 
> You were sent this message because you have subscribed to our mailing 
> list. If you don't want to receive these emails from TRNW in the 
> future, please unsubscribe here:
> https://www.trnw.net/unsubscribe.php?forum=2
> TRNW Inc., 2825 Walnut Terrace, Modesto, CA 95355