TRNW-2: 2020 Ford Transit 6F50

[Service - Hutt Automatics]

Correction, the oil p[ump is bolt onto the main case underneath at the rear of the trans.


________________________________
From: trnw2-bounces at trnw.net <trnw2-bounces at trnw.net> on behalf of Service - Hutt Automatics via trnw2 <trnw2 at trnw.net>
Sent: Thursday, September 25, 2025 9:48 AM
To: Tod Chretien <tod at trnw.net>; Technical Discussion Forum <trnw2 at trnw.net>; Wayne <wagarrick at yahoo.com>
Subject: Re: TRNW-2: 2020 Ford Transit 6F50

Thanks everyone, I happen to have an 8F here too! I am wondering if it is tied into the stop/go oil circuit as this has an electric pump bolted to the bottom of the bell housing?

Deane


________________________________
From: trnw2-bounces at trnw.net <trnw2-bounces at trnw.net> on behalf of Wayne via trnw2 <trnw2 at trnw.net>
Sent: Thursday, September 25, 2025 2:11 AM
To: Tod Chretien <tod at trnw.net>; Technical Discussion Forum <trnw2 at trnw.net>
Subject: Re: TRNW-2: 2020 Ford Transit 6F50

Sounds like an 8f
Wayne Garrick

On Sep 24, 2025, at 9:43 AM, Tod Chretien via trnw2 <trnw2 at trnw.net> wrote:



[[ But a 19mm? That's the same as 3/4"! I have no idea where it goes. ]]

In a sling shot! LOL


On 9/24/2025 6:40 AM, jbockus at hiwaay.net<mailto:jbockus at hiwaay.net> wrote:
But a 19mm? That's the same as 3/4"! I have no idea where it goes.

On 2025-09-24 7:46 am, Tod Chretien via trnw2 wrote:
In the pump under that big spring?

On 9/24/2025 1:30 AM, Steve Everett via trnw2 wrote:

I don't know that I have built a 6f50 as late as a 2020?  but having
built many of them I have never seen a checkball in one other than
in the valvebody,  and definitely never one that big ?

Steve

On Tue, Sep 23, 2025 at 8:21 PM Service - Hutt Automatics via
trnw2 <trnw2 at trnw.net><mailto:trnw2 at trnw.net> wrote:

Hi all,

I have the above unit here, been apart for about 6 weeks and
wanting to confirm the position of a 19 mm checkball. Pretty sure
it sits between the case and the oil pump where the double booted
seal is. It fits inside the larger of the two holes in the case.
Is that correct? About to bolt the housing together and can’t
find any info on its location.

Many thanks,  Deane

20 Bridge Street

Lower Hutt 5010

04 569-3161

This message was sent from the TRNW Technical Discussion Forum
(trnw2). You were sent this message because you have subscribed to
our mailing list. If you don't want to receive these emails from
TRNW in the future, please unsubscribe here:
https://www.trnw.net/unsubscribe.php?forum=2
TRNW Inc., 2825 Walnut Terrace, Modesto, CA 95355

This message was sent from the TRNW Technical Discussion Forum
(trnw2). You were sent this message because you have subscribed to
our mailing list. If you don't want to receive these emails from
TRNW in the future, please unsubscribe here:
https://www.trnw.net/unsubscribe.php?forum=2
TRNW Inc., 2825 Walnut Terrace, Modesto, CA 95355

--
Best Regards,
Tod Chretien
TRNW Inc.
http://www.trnw.net
This message was sent from the TRNW Technical Discussion Forum (trnw2). You were sent this message because you have subscribed to our mailing list. If you don't want to receive these emails from TRNW in the future, please unsubscribe here:
https://www.trnw.net/unsubscribe.php?forum=2
TRNW Inc., 2825 Walnut Terrace, Modesto, CA 95355

--
Best Regards,
Tod Chretien
TRNW Inc.
https://www.trnw.net

This message was sent from the TRNW Technical Discussion Forum (trnw2). You were sent this message because you have subscribed to our mailing list. If you don't want to receive these emails from TRNW in the future, please unsubscribe here:
https://www.trnw.net/unsubscribe.php?forum=2
TRNW Inc., 2825 Walnut Terrace, Modesto, CA 95355
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.trnw.net/pipermail/trnw2/attachments/20250924/e57d8384/attachment-0001.html>