TRNW-2: 2007 ford edge PCM

[Ryan D]

Thanks for the help guys. It's a bench job I did for a shop.
I sent them the link. They said they're going to go with Circuit Board
Medics.

On Friday, September 26, 2025, Dan Hogan via trnw2 <trnw2 at trnw.net> wrote:

> Thanks Bill.  Good to know they do those ... wasn't aware.
>
> Here's the direct link to them:
>
> https://circuitboardmedics.com/2007-2010-ford-edge-pcm-ecm-repair/
> ​
> <https://circuitboardmedics.com/2007-2010-ford-edge-pcm-ecm-repair/>
> 2007 – 2010 Ford Edge PCM ECM Repair
> <https://circuitboardmedics.com/2007-2010-ford-edge-pcm-ecm-repair/>
> Circuit Board Medics can rebuild your failed PCM from your 2007-2010 Ford
> Edge 3.5L V6 engine. No programming required after repair!
> circuitboardmedics.com
> ​
>
>
> ---
>
>
> Dan Hogan
>
> Buster's Transmission Service
>
> https://busterstransmission.com
>
> 704.847.5321
> ------------------------------
> *From:* trnw2-bounces at trnw.net <trnw2-bounces at trnw.net> on behalf of
> William Chechel via trnw2 <trnw2 at trnw.net>
> *Sent:* Friday, September 26, 2025 3:20 PM
> *To:* Tod Chretien <tod at trnw.net>; Technical Discussion Forum <
> trnw2 at trnw.net>
> *Subject:* Re: TRNW-2: 2007 ford edge PCM
>
> Circuit board medics has those. The last one I did came plug and play. We
> replaced it due to a bad ignition coil. They are actually not that
> expensive.
>
> On Fri, Sep 26, 2025 at 3:03 PM Tod Chretien via trnw2 <trnw2 at trnw.net>
> wrote:
>
> If you have that cloning software everyone is talking about I am sure
> you can.
>
> If you don't have the cloning software then I am not 100% sure, but my
> guess is No. If it has that PATS key then that's a hurdle in itself.
>
> --
> Best Regards,
> Tod Chretien
> TRNW Inc.
> https://www.trnw.net
> <https://urldefense.proofpoint.com/v2/url?u=https-3A__www.trnw.net&d=DwMFaQ&c=euGZstcaTDllvimEN8b7jXrwqOf-v5A_CdpgnVfiiMM&r=smOzNWPZu5-MBJg-0tkHhHoVW9xEBKdKWsMxBeFAJDZVJI6X79ZhQVJ_erT6I9aF&m=Tq3ijfH26DNQEm3tZc_CbkhijcTMBMf56FCM7K0YvdWYeWOhUef2d_KQe3X1pyQj&s=2UPSg04p0VblglD4eEkquGqyVg4Ka0_2VNdwV8WxB04&e=>
>
>
>
> On 9/26/2025 11:51 AM, Ryan D via trnw2 wrote:
> > Can I put a used pcm in a 2007 ford edge?
> >
> > --
> > Ryan
> >
> > This message was sent from the TRNW Technical Discussion Forum (trnw2).
> You were sent this message because you have subscribed to our mailing list.
> If you don't want to receive these emails from TRNW in the future, please
> unsubscribe here:
> > https://www.trnw.net/unsubscribe.php?forum=2
> <https://urldefense.proofpoint.com/v2/url?u=https-3A__www.trnw.net_unsubscribe.php-3Fforum-3D2&d=DwMFaQ&c=euGZstcaTDllvimEN8b7jXrwqOf-v5A_CdpgnVfiiMM&r=smOzNWPZu5-MBJg-0tkHhHoVW9xEBKdKWsMxBeFAJDZVJI6X79ZhQVJ_erT6I9aF&m=Tq3ijfH26DNQEm3tZc_CbkhijcTMBMf56FCM7K0YvdWYeWOhUef2d_KQe3X1pyQj&s=NPh1bVMW5_0WobbSa4_PlBj540jih4aeHQeMuj80P5s&e=>
> > TRNW Inc., 2825 Walnut Terrace, Modesto, CA 95355
> <https://www.google.com/maps/search/2825+Walnut+Terrace,+Modesto,+CA+95355?entry=gmail&source=g>
>
> This message was sent from the TRNW Technical Discussion Forum (trnw2).
> You were sent this message because you have subscribed to our mailing list.
> If you don't want to receive these emails from TRNW in the future, please
> unsubscribe here:
> https://www.trnw.net/unsubscribe.php?forum=2
> <https://urldefense.proofpoint.com/v2/url?u=https-3A__www.trnw.net_unsubscribe.php-3Fforum-3D2&d=DwMFaQ&c=euGZstcaTDllvimEN8b7jXrwqOf-v5A_CdpgnVfiiMM&r=smOzNWPZu5-MBJg-0tkHhHoVW9xEBKdKWsMxBeFAJDZVJI6X79ZhQVJ_erT6I9aF&m=Tq3ijfH26DNQEm3tZc_CbkhijcTMBMf56FCM7K0YvdWYeWOhUef2d_KQe3X1pyQj&s=NPh1bVMW5_0WobbSa4_PlBj540jih4aeHQeMuj80P5s&e=>
> TRNW Inc., 2825 Walnut Terrace, Modesto, CA 95355
> <https://www.google.com/maps/search/2825+Walnut+Terrace,+Modesto,+CA+95355?entry=gmail&source=g>
>
>
>
> --
> Bill Chechel
> Cell# 484-241-1072
>
>
>
>
>
>

-- 
Ryan
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.trnw.net/pipermail/trnw2/attachments/20250926/3979c64e/attachment.html>