TRNW-2: System One recycling machine

[Steve Everett]

Yes,  that is what they called the reset,   it worked the first time I got
it started,  but there is a vacuum line about 3/8 in diameter that runs off
the back of a vacuum valve the two small lines hook to,  the large vacuum
line goes up to a swtch with two wires plugged into it,   it was running
and I pulled the 3.8 line off to check vacuum and it shut off,   now I
can't get it to restart ,  I've tried crossing that switch out,  unplugging
it,   no difference

   Steve

On Wed, Oct 8, 2025 at 11:50 AM pat schulte <zzyzxpat at gmail.com> wrote:

> Did you try unplugging it, hold both the on/off and recycle buttons in,
> and then plugging it back in?
>
> On Wed, Oct 8, 2025 at 8:48 AM Steve Everett via trnw2 <trnw2 at trnw.net>
> wrote:
>
>> Thanks ,
>>             I'll check with him ,   I'm trying to resurrect a machine
>> that the recycling part of it hasn't worked in 7 or 8 years, and it was all
>> gunked up and had old mineral spirits in the vacuum lines and in the vacuum
>> diaphragm where it wasn't supposed to be,  Recycle button had failed,  I
>> swapped the override button in place of it and got it to start yesterday,
>> but wasn't pulling vaccum to the diaphragm,  so it took the whole vacuum
>> system apart and cleaned it,   then I pulled a vacuum line off it and shut
>> down ?   now I can't get it to restart,  even by doing a system reset ?
>> I'll figure it out one way or another , lol
>>
>>    Steve
>>
>> On Wed, Oct 8, 2025 at 9:17 AM art landeck via trnw2 <trnw2 at trnw.net>
>> wrote:
>>
>>> Call this guy jason  Dobler 612-223-9903 he fixs them and sells them
>>> cheap. he can help you
>>>
>>> Steve Everett via trnw2 wrote on 10/8/2025 9:09 AM:
>>>
>>> Sorry if this isn't the correct forum , but it is a technical question
>>> so ,,,
>>>
>>>    Anyone have the service/repair manual for these units ?  I"m working
>>> on an older 300 series, but they're all similar,
>>>
>>>    Steve
>>>
>>>
>>> This message was sent from the TRNW Technical Discussion Forum (trnw2). You were sent this message because you have subscribed to our mailing list. If you don't want to receive these emails from TRNW in the future, please unsubscribe here:https://www.trnw.net/unsubscribe.php?forum=2
>>> TRNW Inc., 2825 Walnut Terrace, Modesto, CA 95355
>>>
>>>
>>> This message was sent from the TRNW Technical Discussion Forum (trnw2).
>>> You were sent this message because you have subscribed to our mailing list.
>>> If you don't want to receive these emails from TRNW in the future, please
>>> unsubscribe here:
>>> https://www.trnw.net/unsubscribe.php?forum=2
>>> TRNW Inc., 2825 Walnut Terrace, Modesto, CA 95355
>>
>> This message was sent from the TRNW Technical Discussion Forum (trnw2).
>> You were sent this message because you have subscribed to our mailing list.
>> If you don't want to receive these emails from TRNW in the future, please
>> unsubscribe here:
>> https://www.trnw.net/unsubscribe.php?forum=2
>> TRNW Inc., 2825 Walnut Terrace, Modesto, CA 95355
>
>
>
> --
> Pat Schulte
> AAMCO Transmissions
> Temecula, Ca.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.trnw.net/pipermail/trnw2/attachments/20251008/81f79004/attachment-0001.html>