TRNW-2: 6t40 can bus diagnosing

[Justin Merritt]

Hello all, 
I am working on a 14 Chevy Cruze 1.8 engine. I am chasing a loss of communication of both the transmission and engine control module. I struggle when it comes to testing wiring on the can bus lines, I just don’t have enough experience with it. I’m determine to figure this one of for a learning experience. I have included a diagram of some wiring I am testing, and I have continuity between pin 29 and 6 and 43 and 14, but I do not have continuity between 29 and 7 and 43 and 8. The diagram cuts off, but the mf3/mz0 squares just loop around the tcm and back into the wires 6 and 8 of the tcm.  Would I be thinking right that I have a break in the 2 bus wires 29 and 7, and 43 and 8 that is causing my no communication? 
Thanks for any help. 
Justin 

-------------- next part --------------
A non-text attachment was scrubbed...
Name: image1.jpeg
Type: image/jpeg
Size: 138591 bytes
Desc: not available
URL: <http://lists.trnw.net/pipermail/trnw2/attachments/20251019/d7a7f903/attachment-0001.jpeg>
-------------- next part --------------

Sent from my iPhone