TRNW-2: 68rfe Rev Max parts

[Steve Everett]

    I've used both of those numerous times, but a little over a year ago I
had a unit come back that had been out a few months,  the accumulators had
blown out of the vb, pulling the heads off a couple of the screws and
bending the plate a good bit, I posted about it on the forum, and general
consensus was sometimes those tuneless kits put out way more than the
advertised 220 or so psi ?

   I've probably got 12 or 15 68rfe's out there with my name on them using
the tuneless kits,  that was the only one that caused a problem as far as I
know ?   but I've been a little hesitant to use them since then

   Steve

On Wed, Oct 22, 2025 at 2:43 PM Tod Chretien via trnw2 <trnw2 at trnw.net>
wrote:

> That seems over-kill if it's not tuned. I would use the Transgo Tuneless
> kit myself. They shift great with that kit. I also like that Transgo OD
> pressure plate that allows for an additional clutch.
>
> --
> Best Regards,
> Tod Chretien
> TRNW Inc.https://www.trnw.net
>
> On 10/22/2025 10:06 AM, Steve Everett wrote:
>
>   I've seen the channel plate used in a couple shops I was at, by the
> other builder,  I've used the seperator plate on a lot of builds, even
> stock builds,  we've got a customer from out of town, broke down here, and
> he wants an upgraded rebuild, we're pricing him a Rev max drum, which comes
> already built ?  I didn't know that until I priced it, a billet input shaft
> and that valvebody kit,  the truck isn't tuned, totally stock, we are
> pricing in a billet converter of course,
>
>   Steve
>
> On Wed, Oct 22, 2025 at 12:59 PM Tod Chretien via trnw2 <trnw2 at trnw.net>
> wrote:
>
>> I have used the separator plate and the channel plate but not their
>> accumulators. The channel plate is needed on anything with a tune.
>>
>> --
>> Best Regards,
>> Tod Chretien
>> TRNW Inc.
>> https://www.trnw.net
>>
>>
>>
>> On 10/22/2025 8:30 AM, Steve Everett via trnw2 wrote:
>> >    I have not used any of Rev Max's parts for these other than the
>> > bonded seperator plate,  has anyone used their 68rfe-347 valve body
>> > foundation build kit ?  comes with channel plate, seperator plate and
>> > billet accumulators,
>> >
>> > Steve
>> >
>> > This message was sent from the TRNW Technical Discussion Forum (trnw2).
>> You were sent this message because you have subscribed to our mailing list.
>> If you don't want to receive these emails from TRNW in the future, please
>> unsubscribe here:
>> > https://www.trnw.net/unsubscribe.php?forum=2
>> > TRNW Inc., 2825 Walnut Terrace, Modesto, CA 95355
>>
>> This message was sent from the TRNW Technical Discussion Forum (trnw2).
>> You were sent this message because you have subscribed to our mailing list.
>> If you don't want to receive these emails from TRNW in the future, please
>> unsubscribe here:
>> https://www.trnw.net/unsubscribe.php?forum=2
>> TRNW Inc., 2825 Walnut Terrace, Modesto, CA 95355
>
> This message was sent from the TRNW Technical Discussion Forum (trnw2).
> You were sent this message because you have subscribed to our mailing list.
> If you don't want to receive these emails from TRNW in the future, please
> unsubscribe here:
> https://www.trnw.net/unsubscribe.php?forum=2
> TRNW Inc., 2825 Walnut Terrace, Modesto, CA 95355
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.trnw.net/pipermail/trnw2/attachments/20251022/abb1a1df/attachment.html>