TRNW-2: 4R70W question.

[Fred Whitaker]

  Guys, The sensor reads in a different spot in the case. Thats why you have to pull a late one back out if you clock the center support snap ring wrong. The out put sensors are different part #s as well!
________________________________
From: trnw2-bounces at trnw.net <trnw2-bounces at trnw.net> on behalf of jbockus--- via trnw2 <trnw2 at trnw.net>
Sent: Friday, November 7, 2025 6:56 AM
To: Ryan D <ryan4r100 at gmail.com>; Technical Discussion Forum <trnw2 at trnw.net>
Subject: Re: TRNW-2: 4R70W question.

I would say yes as long as you use the planetary and rear speed sensor
from your original 1-sensor case. I'm sure the sensors are the same
diameter and depth. And just plug the front sensor hole with a speed
sensor. That will throw someone off down the line, lol

On 2025-11-06 10:49 pm, Ryan D via trnw2 wrote:
> Can I use a 2 speed sensor case in place of a one speed sensor case on
> a 4R70W? Both have 3 bolt starters.
>
> --
> Ryan
> This message was sent from the TRNW Technical Discussion Forum (trnw2).
> You were sent this message because you have subscribed to our mailing
> list. If you don't want to receive these emails from TRNW in the
> future, please unsubscribe here:
> https://www.trnw.net/unsubscribe.php?forum=2
> TRNW Inc., 2825 Walnut Terrace, Modesto, CA 95355
This message was sent from the TRNW Technical Discussion Forum (trnw2). You were sent this message because you have subscribed to our mailing list. If you don't want to receive these emails from TRNW in the future, please unsubscribe here:
https://www.trnw.net/unsubscribe.php?forum=2
TRNW Inc., 2825 Walnut Terrace, Modesto, CA 95355
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.trnw.net/pipermail/trnw2/attachments/20251107/518918b9/attachment-0001.html>