TRNW-2: RE0F10J, tips to help insure success

[J V]

thank you guys for sharing your experience. The trans works great but
can't clear the judderr code. Customer knows people at Nissan dealer so he
going to handle that.

On Fri, Dec 5, 2025 at 2:33 PM Lynda Smith via trnw2 <trnw2 at trnw.net> wrote:

> Does that model have an internal “E prom” (not sure if that’s the correct
> term). If so I would reinstall the original one from the car.
>
> Regards Scott
> (Good Luck)
>
> Sent from my iPhone
>
> On 5 Dec 2025, at 9:37 pm, Fred Whitaker via trnw2 <trnw2 at trnw.net> wrote:
>
> 
>  I agree with what Pat said. The only reason I ever get these Programmed
> is when installing one from the Dealer for the warranty. Nissan uses it as
> a loophole to get out of the warranty. I would drive it after you get it
> back together and if it works just let it go.
> ------------------------------
> *From:* trnw2-bounces at trnw.net <trnw2-bounces at trnw.net> on behalf of pat
> schulte via trnw2 <trnw2 at trnw.net>
> *Sent:* Thursday, December 4, 2025 8:41 AM
> *To:* John Vanklavern <jvk12280 at gmail.com>; Technical Discussion Forum <
> trnw2 at trnw.net>
> *Subject:* Re: TRNW-2: RE0F10J, tips to help insure success
>
> We build the original units and do not update any programming and have no
> issues. If you are installing a unit from a different vehicle that may be a
> different story. I would not be afraid to drive it to the dealer.
> When we do install a used unit (Carmax), same story, we do not program.
> The only reason we would program any of these would be if they had a
> judder code.
>
> On Thu, Dec 4, 2025 at 5:00 AM John Vanklavern via trnw2 <trnw2 at trnw.net>
> wrote:
>
> *Date:* Thu Dec 4 4:59:35 PST 2025
> *Subject:* RE0F10J, tips to help insure success
>
> 15 Murano. long story but basically I'm installing a mystery used trans as
> per customer request. He is a good customer and I will get paid regardless
> of results. I recommended against it. I am hoping to do everything I can to
> help this work out for him. I don't have any experience with these. The
> plan is to install it, get fluid as correct as possible on the hoist, then
> he is going to tow it to dealership for latest tcm software. I'm just
> hoping to hear some comments from you guys who have done more of these. I
> would normally just turn away a job like this but willing for this
> customer.... thx in advance
>
> John Vanklavern
> Jvk Services Llc
> West Olive, Michigan USA
> TRNW Member Since: 5/23/2025
>
> This message was sent from the TRNW Technical Discussion Forum (trnw2).
> You were sent this message because you have subscribed to our mailing list.
> If you don't want to receive these emails from TRNW in the future, please
> unsubscribe here:
> https://www.trnw.net/unsubscribe.php?forum=2
> TRNW Inc., 2825 Walnut Terrace, Modesto, CA 95355
>
>
>
> --
> Pat Schulte
> AAMCO Transmissions
> Temecula, Ca.
> This message was sent from the TRNW Technical Discussion Forum (trnw2).
> You were sent this message because you have subscribed to our mailing list.
> If you don't want to receive these emails from TRNW in the future, please
> unsubscribe here:
> https://www.trnw.net/unsubscribe.php?forum=2
> TRNW Inc., 2825 Walnut Terrace, Modesto, CA 95355
>
> This message was sent from the TRNW Technical Discussion Forum (trnw2).
> You were sent this message because you have subscribed to our mailing list.
> If you don't want to receive these emails from TRNW in the future, please
> unsubscribe here:
> https://www.trnw.net/unsubscribe.php?forum=2
> TRNW Inc., 2825 Walnut Terrace, Modesto, CA 95355
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.trnw.net/pipermail/trnw2/attachments/20251205/2cfd2837/attachment.html>