TRNW-2: WORN out 48RE rooster comb detent

[Healy Powertrain]

Something else to pay attention to on this Rooster comb:
Make sure the comb is not loose/seperating from the shaft. Some are poorly press fit. Ive found some loose
I cant remember if it was a 47 or 48RE issue.

Replace the plastic cam too. Sonnax makes both 3 prong and 5 prong Range Sensor Versions. 48RE is 5-prong

On Thursday, March 13, 2025 at 7:45:38 pm +01:00, John Lovell via trnw2 <trnw2 at trnw.net> wrote:

> Thanks for the replies folks. Going to try the Sonnax fix. What sucks is I have done the Sonnax fix before, but after discovering the Tgo fix and how much easier it is, that's been my method. Wouldn't you know, now I can't find my reamer.
> 
> Thanks again everyone.
> 
> 
> 
> 
> On Thu, Mar 13, 2025 at 9:09 AM John Lovell via trnw2 <<trnw2 at trnw.net>> wrote:
> 
> > Had a guy drop his snow plow truck off. Has the "hard to get out of park" complaint. Talking to the guy on the phone I explain what's going on and I'm going to be a "hero" and fix his problem. Dropped the VB down and someone had the same thought many moons ago. I was going to use the Tgo fix for it but I was beat to the punch. Already has one but now it is so badly worn the whole length of the bore is worn BADLY. Guess all those forward/reverse took its toll.
> > 
> > Question is can I use a 46RE VB and install the springs from the 48 in it? As always thanks for your time and help.
> > 
> > John
> > 
> > 
> > This message was sent from the TRNW Technical Discussion Forum (trnw2). You were sent this message because you have subscribed to our mailing list. If you don't want to receive these emails from TRNW in the future, please unsubscribe here:
> > <https://www.trnw.net/unsubscribe.php?forum=2>
> > 
> > TRNW Inc., 2825 Walnut Terrace, Modesto, CA 95355
> > 
> This message was sent from the TRNW Technical Discussion Forum (trnw2). You were sent this message because you have subscribed to our mailing list. If you don't want to receive these emails from TRNW in the future, please unsubscribe here:
> <https://www.trnw.net/unsubscribe.php?forum=2>
> TRNW Inc., 2825 Walnut Terrace, Modesto, CA 95355
> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.trnw.net/pipermail/trnw2/attachments/20250314/305b4300/attachment.html>