TRNW-2: WORN out 48RE rooster comb detent

[pat schulte]

Got a Precison kit for a 48RE this week, I normally don't use Precision,
but it had included in the kit a new plastic piece for the rooster comb,
just rivet it on.

On Fri, Mar 14, 2025 at 11:07 AM Healy Powertrain via trnw2 <trnw2 at trnw.net>
wrote:

> Something else to pay attention to on this Rooster comb:
> Make sure the comb is not loose/seperating from the shaft.  Some are
> poorly press fit. Ive found some loose
> I cant remember if it was a 47 or 48RE issue.
> Replace the plastic cam too. Sonnax makes both 3 prong and 5 prong Range
> Sensor Versions. 48RE is 5-prong
>
>
> On Thursday, March 13, 2025 at 7:45:38 pm +01:00, John Lovell via trnw2 <
> trnw2 at trnw.net> wrote:
>
> Thanks for the replies folks. Going to try the Sonnax fix. What sucks is I
> have done the Sonnax fix before, but after discovering the Tgo fix and how
> much easier it is, that's been my method. Wouldn't you know, now I can't
> find my reamer.
>
> Thanks again everyone.
>
>
>
> On Thu, Mar 13, 2025 at 9:09 AM John Lovell via trnw2 <trnw2 at trnw.net>
> wrote:
>
> Had a guy drop his snow plow truck off. Has the "hard to get out of park"
> complaint. Talking to the guy on the phone I explain what's going on and
> I'm going to be a "hero" and fix his problem. Dropped the VB down and
> someone had the same thought many moons ago. I was going to use the Tgo fix
> for it but I was beat to the punch. Already has one but now it is so badly
> worn the whole length of the bore is worn BADLY. Guess all those
> forward/reverse took its toll.
>
> Question is can I use a 46RE VB and install the springs from the 48 in
> it?  As always thanks for your time and help.
>
> John
>
>
> This message was sent from the TRNW Technical Discussion Forum (trnw2).
> You were sent this message because you have subscribed to our mailing list.
> If you don't want to receive these emails from TRNW in the future, please
> unsubscribe here:
> https://www.trnw.net/unsubscribe.php?forum=2
> TRNW Inc., 2825 Walnut Terrace, Modesto, CA 95355
>
> This message was sent from the TRNW Technical Discussion Forum (trnw2).
> You were sent this message because you have subscribed to our mailing list.
> If you don't want to receive these emails from TRNW in the future, please
> unsubscribe here:
> https://www.trnw.net/unsubscribe.php?forum=2
> TRNW Inc., 2825 Walnut Terrace, Modesto, CA 95355
>
>
> This message was sent from the TRNW Technical Discussion Forum (trnw2).
> You were sent this message because you have subscribed to our mailing list.
> If you don't want to receive these emails from TRNW in the future, please
> unsubscribe here:
> https://www.trnw.net/unsubscribe.php?forum=2
> TRNW Inc., 2825 Walnut Terrace, Modesto, CA 95355



-- 
Pat Schulte
AAMCO Transmissions
Temecula, Ca.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.trnw.net/pipermail/trnw2/attachments/20250314/cfe3c3a6/attachment.html>