TRNW-2: 68rfe caged spring assembly

[pat schulte]

Agree, I have put many back together with 1 broke, I have not seen 2 or
more broke but we don't do a lot of trucks.

On Fri, Oct 10, 2025 at 4:52 PM John Lovell via trnw2 <trnw2 at trnw.net>
wrote:

> Forgot to say, 1 broke I work with it. 2 or more, break them all. Same
> install method.
>
> On Fri, Oct 10, 2025, 7:45 PM John Lovell <pctrans07 at gmail.com> wrote:
>
>> I see it a lot. Like Pat said, $66 ouch! Patience and the green disc that
>> come in the Transtec kits is what I use.
>>
>> On Fri, Oct 10, 2025, 4:09 PM Brett Karulak via trnw2 <trnw2 at trnw.net>
>> wrote:
>>
>>> The spring assembly between UD molded piston and balance piston in the
>>> input drum assembly, where the tabs break off, at one of the shops I talk
>>> to, they break the rest of the tabs off and run it.  Do any of you do
>>> this?  I have always been getting new OE caged spring assemblies.
>>>
>>> Thank you,
>>> Brett
>>> This message was sent from the TRNW Technical Discussion Forum (trnw2).
>>> You were sent this message because you have subscribed to our mailing list.
>>> If you don't want to receive these emails from TRNW in the future, please
>>> unsubscribe here:
>>> https://www.trnw.net/unsubscribe.php?forum=2
>>> TRNW Inc., 2825 Walnut Terrace, Modesto, CA 95355
>>
>> This message was sent from the TRNW Technical Discussion Forum (trnw2).
> You were sent this message because you have subscribed to our mailing list.
> If you don't want to receive these emails from TRNW in the future, please
> unsubscribe here:
> https://www.trnw.net/unsubscribe.php?forum=2
> TRNW Inc., 2825 Walnut Terrace, Modesto, CA 95355



-- 
Pat Schulte
AAMCO Transmissions
Temecula, Ca.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.trnw.net/pipermail/trnw2/attachments/20251010/76077b0b/attachment.html>