TRNW-2: Pump install 50-40LE

[Steve Everett]

   I always stuck something under the back of the unit so that the pump
area was angled slightly downward, and I would stick the hub/sprag piece in
place with green transjel,  slide it in slowly and start a couple bolts,
its a little tricky but not bad

   Steve

On Tue, Oct 14, 2025 at 7:56 AM John Lovell via trnw2 <trnw2 at trnw.net>
wrote:

> Carry in job. GR shop installed a used engine and didn't have TC in
> correctly and broke pump drive gears. I am experiencing difficulties
> installing the pump as it sits. Am I going to need to pull the back apart
> and install pump first? Not been into one before. "how hard can it be?"
> someone thought.
>
>
> This message was sent from the TRNW Technical Discussion Forum (trnw2).
> You were sent this message because you have subscribed to our mailing list.
> If you don't want to receive these emails from TRNW in the future, please
> unsubscribe here:
> https://www.trnw.net/unsubscribe.php?forum=2
> TRNW Inc., 2825 Walnut Terrace, Modesto, CA 95355
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.trnw.net/pipermail/trnw2/attachments/20251014/67d17139/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: gmail_images20251014_075432.png
Type: image/png
Size: 2353275 bytes
Desc: not available
URL: <http://lists.trnw.net/pipermail/trnw2/attachments/20251014/67d17139/attachment-0001.png>