TRNW-2: Pump install 50-40LE

[pat schulte]

I do it the same as Steve.

On Tue, Oct 14, 2025 at 5:28 AM Steve Everett via trnw2 <trnw2 at trnw.net>
wrote:

>    I always stuck something under the back of the unit so that the pump
> area was angled slightly downward, and I would stick the hub/sprag piece in
> place with green transjel,  slide it in slowly and start a couple bolts,
> its a little tricky but not bad
>
>    Steve
>
> On Tue, Oct 14, 2025 at 7:56 AM John Lovell via trnw2 <trnw2 at trnw.net>
> wrote:
>
>> Carry in job. GR shop installed a used engine and didn't have TC in
>> correctly and broke pump drive gears. I am experiencing difficulties
>> installing the pump as it sits. Am I going to need to pull the back apart
>> and install pump first? Not been into one before. "how hard can it be?"
>> someone thought.
>>
>>
>> This message was sent from the TRNW Technical Discussion Forum (trnw2).
>> You were sent this message because you have subscribed to our mailing list.
>> If you don't want to receive these emails from TRNW in the future, please
>> unsubscribe here:
>> https://www.trnw.net/unsubscribe.php?forum=2
>> TRNW Inc., 2825 Walnut Terrace, Modesto, CA 95355
>
> This message was sent from the TRNW Technical Discussion Forum (trnw2).
> You were sent this message because you have subscribed to our mailing list.
> If you don't want to receive these emails from TRNW in the future, please
> unsubscribe here:
> https://www.trnw.net/unsubscribe.php?forum=2
> TRNW Inc., 2825 Walnut Terrace, Modesto, CA 95355



-- 
Pat Schulte
AAMCO Transmissions
Temecula, Ca.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.trnw.net/pipermail/trnw2/attachments/20251014/62eebc7c/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: gmail_images20251014_075432.png
Type: image/png
Size: 2353275 bytes
Desc: not available
URL: <http://lists.trnw.net/pipermail/trnw2/attachments/20251014/62eebc7c/attachment-0001.png>