TRNW-2: 4R70W question.

[pat schulte]

I can't tell you for sure as I have never tried, but I have seen some units
come in where the hole where the input sensor would go have a plug from the
factory. I "think" the output sensor hole is in the same place, instead of
reading the holes in the carrier it reads the park lugs, but the lugs were
made longer to be in the correct position.

On Fri, Nov 7, 2025 at 8:15 AM Ryan D via trnw2 <trnw2 at trnw.net> wrote:

> Fred
>
> The input speed sensor won't be used. I'm thinking that one won't matter.
> The output sensor could be a problem.  the shop is bringing me a core they
> have today so I can look at it. Thank you guys for your thoughts on this.
>
>
>
> On Friday, November 7, 2025, Fred Whitaker via trnw2 <trnw2 at trnw.net>
> wrote:
>
>>   Guys, The sensor reads in a different spot in the case. Thats why you
>> have to pull a late one back out if you clock the center support snap ring
>> wrong. The out put sensors are different part #s as well!
>> ------------------------------
>> *From:* trnw2-bounces at trnw.net <trnw2-bounces at trnw.net> on behalf of
>> jbockus--- via trnw2 <trnw2 at trnw.net>
>> *Sent:* Friday, November 7, 2025 6:56 AM
>> *To:* Ryan D <ryan4r100 at gmail.com>; Technical Discussion Forum <
>> trnw2 at trnw.net>
>> *Subject:* Re: TRNW-2: 4R70W question.
>>
>> I would say yes as long as you use the planetary and rear speed sensor
>> from your original 1-sensor case. I'm sure the sensors are the same
>> diameter and depth. And just plug the front sensor hole with a speed
>> sensor. That will throw someone off down the line, lol
>>
>> On 2025-11-06 10:49 pm, Ryan D via trnw2 wrote:
>> > Can I use a 2 speed sensor case in place of a one speed sensor case on
>> > a 4R70W? Both have 3 bolt starters.
>> >
>> > --
>> > Ryan
>> > This message was sent from the TRNW Technical Discussion Forum (trnw2).
>> > You were sent this message because you have subscribed to our mailing
>> > list. If you don't want to receive these emails from TRNW in the
>> > future, please unsubscribe here:
>> > https://www.trnw.net/unsubscribe.php?forum=2
>> > TRNW Inc., 2825 Walnut Terrace, Modesto, CA 95355
>> <https://www.google.com/maps/search/2825+Walnut+Terrace,+Modesto,+CA+95355?entry=gmail&source=g>
>> This message was sent from the TRNW Technical Discussion Forum (trnw2).
>> You were sent this message because you have subscribed to our mailing list.
>> If you don't want to receive these emails from TRNW in the future, please
>> unsubscribe here:
>> https://www.trnw.net/unsubscribe.php?forum=2
>> TRNW Inc., 2825 Walnut Terrace, Modesto, CA 95355
>> <https://www.google.com/maps/search/2825+Walnut+Terrace,+Modesto,+CA+95355?entry=gmail&source=g>
>>
>
>
> --
> Ryan
> This message was sent from the TRNW Technical Discussion Forum (trnw2).
> You were sent this message because you have subscribed to our mailing list.
> If you don't want to receive these emails from TRNW in the future, please
> unsubscribe here:
> https://www.trnw.net/unsubscribe.php?forum=2
> TRNW Inc., 2825 Walnut Terrace, Modesto, CA 95355



-- 
Pat Schulte
AAMCO Transmissions
Temecula, Ca.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.trnw.net/pipermail/trnw2/attachments/20251107/6fc9a62f/attachment.html>