TRNW-2: Subaru TR580 bearing noise

[Tod Chretien]

You aren't giving my much confidence in rebuilding mine now Steve. If 
you don't think you want to mess with another one, I'm not so sure I 
want to mess with one either. LOL

Are you saying you needed an additional tool to the one Chris posted? Or 
you just need that one? https://ebay.us/m/rkShOK

-- 
Best Regards,
Tod Chretien
TRNW Inc.
https://www.trnw.net

On 12/29/2025 3:34 PM, Steve Everett via trnw2 wrote:
> I got the TR580 partially apart,  but realized I needed one of the 
> tools in order to get the pulleys apart correctly,  so we've ordered 
> the Adapt a case tool for the variator pulley,  should have it in a 
> couple days,   All I can say is I'm not sure I want to fool with 
> another one of these ?  this one had a plastic baffle surrounding the 
> pulleys instead of the metal one I've seen in videos,
>
>      Steve
>
> On Wed, Dec 24, 2025 at 7:58 PM Chris and Cathy Kershaw via trnw2 
> <trnw2 at trnw.net> wrote:
>
>     126,020 when we did this one
>
>     On Wed, Dec 24, 2025 at 7:36 PM Tod Chretien via trnw2
>     <trnw2 at trnw.net> wrote:
>
>         Nice! My wife drives one of those. I may be in the market. LOL
>
>         How many miles are on that thing Chris?
>
>         Tod
>
>         On 12/22/2025 7:09 AM, Chris and Cathy Kershaw via trnw2 wrote:
>>         Here is the tool we bought https://ebay.us/m/rkShOK. Transtar
>>         numbers, for the bearings d823236, d823229.
>>
>>
>>
>>         On Sat, Dec 20, 2025 at 8:26 AM Steve Everett via trnw2
>>         <trnw2 at trnw.net> wrote:
>>
>>                We're supposed to have a core somewhere for one of
>>             these,  if so I'll take it apart first so I know what I'm
>>             getting into, manager originally sold the customer a used
>>             trans ,  supposedly less than 20k miles?  but its noisy,
>>             almost as noisy as the original one, so I'm going to see
>>             if I can fix the "used" one ,  if its fixable,  very few
>>             shops around Atlanta will take in a Subaru,  pretty sure
>>             the manager won't take any more after this one
>>
>>                Steve
>>
>>             On Fri, Dec 19, 2025 at 10:11 PM Ryan D
>>             <ryan4r100 at gmail.com> wrote:
>>
>>                 I had one I changed the bearing on the back of the
>>                 pulley. I didn't have to disassemble the pulleys. I
>>                 had a used trans with a good donor bearing. There's
>>                 videos on youtube for tear down and rebuild I believe.
>>
>>                 On Friday, December 19, 2025, Steve Everett via trnw2
>>                 <trnw2 at trnw.net> wrote:
>>
>>                      I've never attempted one of these units,  just
>>                     curious if anyone knows how much of a hassle they
>>                     are to replace pulley bearings ?  likely the
>>                     primary pulley bearing from what I've researched,
>>                     I know they are hard to find,  apparently Ebay is
>>                     the only readily available source I've found
>>
>>                       Steve
>>
>>
>>
>>                 -- 
>>                 Ryan
>>
>>             This message was sent from the TRNW Technical Discussion
>>             Forum (trnw2). You were sent this message because you
>>             have subscribed to our mailing list. If you don't want to
>>             receive these emails from TRNW in the future, please
>>             unsubscribe here:
>>             https://www.trnw.net/unsubscribe.php?forum=2
>>             TRNW Inc., 2825 Walnut Terrace, Modesto, CA 95355
>>
>>
>>         This message was sent from the TRNW Technical Discussion Forum (trnw2). You were sent this message because you have subscribed to our mailing list. If you don't want to receive these emails from TRNW in the future, please unsubscribe here:
>>         https://www.trnw.net/unsubscribe.php?forum=2
>>         TRNW Inc., 2825 Walnut Terrace, Modesto, CA 95355
>
>         -- 
>         Best Regards,
>         Tod Chretien
>         TRNW Inc.
>         https://www.trnw.net
>
>         This message was sent from the TRNW Technical Discussion Forum
>         (trnw2). You were sent this message because you have
>         subscribed to our mailing list. If you don't want to receive
>         these emails from TRNW in the future, please unsubscribe here:
>         https://www.trnw.net/unsubscribe.php?forum=2
>         TRNW Inc., 2825 Walnut Terrace, Modesto, CA 95355
>
>     This message was sent from the TRNW Technical Discussion Forum
>     (trnw2). You were sent this message because you have subscribed to
>     our mailing list. If you don't want to receive these emails from
>     TRNW in the future, please unsubscribe here:
>     https://www.trnw.net/unsubscribe.php?forum=2
>     TRNW Inc., 2825 Walnut Terrace, Modesto, CA 95355
>
>
> This message was sent from the TRNW Technical Discussion Forum (trnw2). You were sent this message because you have subscribed to our mailing list. If you don't want to receive these emails from TRNW in the future, please unsubscribe here:
> https://www.trnw.net/unsubscribe.php?forum=2
> TRNW Inc., 2825 Walnut Terrace, Modesto, CA 95355
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.trnw.net/pipermail/trnw2/attachments/20251230/650857c4/attachment-0001.html>